Eureka Mignon Notte Espresso Grind Settings
Curated espresso settings from 0.5–3.5 dial marks from zero point with roast-specific zones, sensitivity data, and calibration guidance.
Grind Settings by Roast Level
Recommended dial marks from zero point ranges for each roast level on the Mignon Notte.
| Roast | Low | Center | High | Confidence |
|---|---|---|---|---|
| Light | 0.5 | 1.2 | 1.8 | D |
| Medium-Light | 1.2 | 1.7 | 2.2 | D |
| Medium | 1.5 | 2.5 | 3 | C |
| Medium-Dark | 2.5 | 3 | 3.3 | D |
| Dark | 2.8 | 3.2 | 3.5 | D |
Values in dial marks from zero point. Center is the best starting point; low/high represent the typical range across different beans.
Sensitivity Zones
How much shot time changes per adjustment step in different zones of the dial.
Fine End
BMost sensitive zone — small changes have big impact on shot time
Mid Range
BSweet spot for most espresso — moderate sensitivity
Coarse End
CLeast sensitive — larger adjustments needed to affect extraction
Tips & Quirks
Things to know about dialing in the Mignon Notte.
Dial numbers repeat every rotation (0-5 marks, then back to 0). Users must count rotations from zero point to know their absolute position. The stock dial is small with hard-to-read numbers; aftermarket dials (e.g., ARO dial, FusedLine 3D-printed dial) are popular upgrades.
Only adjust to a finer setting while the motor is running. Adjusting finer with the motor off can clamp down on a bean fragment and jam or stall the motor.
Factory calibration is inconsistent — the dial faceplate is installed at a random position. Every unit's '0' mark corresponds to a different grind size. Users must establish their own zero/chirp point.
Adjustment mechanism has backlash. Always approach your target setting by rotating clockwise (finer direction) to ensure repeatable positioning.
Grind retention of approximately 2g. Purge 2-3g of beans after changing grind setting before pulling your next shot. A bellows mod is a popular aftermarket fix to reduce retention.
No sound insulation — unlike the Silenzio and higher Mignon models, the Notte lacks internal sound dampening, making it noticeably louder during operation.
Manual dosing only — the grinder activates when a portafilter is pressed against the fork switch underneath the chute. There is no timer, no touchscreen, and no programmable dosing.
Dial is very sensitive — changes for different beans are just a small fraction of one number mark. Make very small adjustments when dialing in.
Calibration
Unit-to-unit variance and zero-point info for the Mignon Notte.
Variance
Zero Point
Burr chirp method: Remove hopper, run motor, rotate dial clockwise until burrs chirp (contact sound), then back off slightly. Zero point is NOT at the '0' mark — factory installs dial marker in arbitrary position. Each unit's zero is different.
Dial has backlash — always approach desired setting by rotating clockwise (toward finer). The manual on/off switch and portafilter-activated dosing can shift the grinder body slightly during use; re-check zero periodically.
Specifications
Get Your Exact Setting
These are starting points. Your unit is different. Calibrate with GrindDial and get a personalized grind setting in 1-2 shots.
Start Dialing In